Owning a jacuzzi is one of the best ways to unwind after a long day, but to keep it in perfect working condition, regular maintenance is essential. Follow these tips to ensure your WOODBRIDGE jacuzzi stays pristine and functional for years to come.

1. Surface Cleaning

Avoid corrosive cleaners for surface cleaning. For general stains, use paint thinner, turpentine, alcohol, or toothpaste.

2. Scratch Repair

If your jacuzzi gets scratched, use 1500-grit wet or dry sandpaper to gently smooth the area. Follow up with a special compound for mirror finishes or apply a layer of polishing wax for the best results.

3. Prevent Corrosion

Do not use or apply corrosive substances on the tub. Keep strong acids, alkalis, and chemical solvents away to avoid damaging the tub material.

4. Temperature Control

Never use water hotter than 176°F. Constant exposure to extremely hot water can reduce the lifespan of your tub. Always fill with cold water first, then add hot water.

5. Avoid Debris Blockage

Ensure no debris blocks the water return during the massage function. Clogged return nets can cause the pump to overheat and fail. Regularly clean the return net cover to prevent blockages.

6. Never Run Dry

Never operate the pump without water in the tub. Running dry can damage the pump’s rubber seal, causing it to overheat and break down.

7. Electrical Safety

Make sure your jacuzzi power supply meets national standards and includes a leakage protection switch. Ensure the power source is properly grounded and has a load capacity of 10A. Protect switches and sockets from water, and consider installing a dedicated control switch near the tub.

8. Power and Motor Maintenance

After each use, always cut off the power supply to prevent damage to the computer system. Perform maintenance only after disconnecting the power. Check the leakage protection switch every six months to ensure it works correctly.